Five-core Aluminium Alloy Power Cable 0.6/1kV Low Resistance Corrosion Resistant

一、Core Selling Points

1.Highly conductive aluminium alloy conductor

Conductivity ≥ 61% IACS, resistivity as low as 0.028Ω-mm²/m, performance comparable to copper cable.

Strong creep resistance, no risk of relaxation in long-term use, ensuring the stability of power transmission.

2.Four-core balanced structure

Standard four-core design (3+1 core), supports three-phase four-wire system, balanced load capacity, suitable for commercial buildings, industrial plants and municipal power distribution.

Neutral and phase wires with the same cross-section design (optional), reduce harmonic interference, improve system safety.

3.Multi-layer protection, durable

Insulation: Cross-linked polyethylene (XLPE) material, temperature resistance class 90 ℃, short-circuit withstand temperature 250 ℃ (5 seconds).

Sheath: Non-halogen, low smoke and flame retardant (LSZH) material, passed IEC 60332 flame retardant test, smoke transmittance >60% in case of fire, to ensure the safety of personnel escape.

4.Lightweight & Environmental Advantages

The density of aluminium alloy is only 30% of that of copper, which reduces the weight by 50% under the same load capacity, and reduces the transportation and installation cost.

100% recyclable materials, in line with RoHS environmental directives, to help green engineering projects.

Product Structure Diagram

二、Application Scenarios

1.Building power distribution: commercial complexes, residential buildings trunk lines.

2.Industrial power: factory power cabinet, equipment power transmission.

3.Municipal engineering: tunnel lighting, underground station power distribution system.

4.New energy field: photovoltaic power station, wind power field connection.

三、Professional Certification and Warranty

International certification: CE, TUV, GB national standard certification.
Warranty commitment: 25 years design life, provide 15 years quality assurance (need to regulate the installation).
Technical support: free of charge to provide load capacity calculation, laying scheme consulting.

四、Why choose our aluminium alloy cable?

Cost-effectiveness: Compared with copper cable, the procurement cost is 30% lower, and the whole life cycle maintenance cost is lower.
Corrosion resistance: Aluminium alloy surface oxide film effectively resists moisture and chemical corrosion, suitable for complex environments.
Measured data: Passed 1000 hours salt spray test and 2000 times bending test by third party organisation, with no degradation of performance